2013 Caterpillar 826H For Sale

RECONDITIONED CAT 826H (2013) UNIT# C7939
MACHINE HOURS: 12674

CAT 826H equipped with a CAT Straight Landfill Blade, Various Wheel Options Available, Automatic Reversing Fan, Automatic Blade Positioning, and Front & Rear Striker Bars.

This used Caterpillar 826H Landfill Compactor is equipped with:
• CAT C15 ACERT Engine
• Powershift Transmission
• Cab w/ A/C
• Automatic Reversing Fan
• STIC Steering
• CAT Straight Landfill Blade
• Automatic Blade Positioning
• Various Wheel Options Available
• No Spin Front Differential
• Swing Out Stairways
• Front & Rear Striker Bars
• Front Window Guard
• Rated at 401 HP
• Weight 82,000 LBS

At 5765 hours, Marcel Equipment completed the following Rebuilding/Reconditioning to this CAT 826H Compactor:

• Installed NEW CAT complete drop-in engine
• Resealed torque, transmission & transfer case
• Installed NEW transmission modulating valves
• REMAN hydraulic fan motor
• Installed NEW main chassis, engine & transmission wiring harnesses
• REBUILT parking brake assembly
• All pressures taken to ensure within OEM spec.

This Compactor was then sold to a Private Landfill Contractor that used it to complete his contract til its current hours.

Marcel Equipment purchased this Compactor back from the Contractor at 12,674 Hours and Completed the following:

Rebuilding / Reconditioning to this Machine:
• Upon arrival at our yard, all guards & covers were removed & the machine was power washed
• Completed visual & operational inspections
• Changed engine oil & filter
• Filter was cut open & checked for contaminants - clean
• Changed transmission oil & filter, filter cut open & checked - some seal and clutch material found
• Checked suction screens - some seal and clutch material found
• Changed hydraulic filter, filter checked - filter clean - changed oil
• Changed fuel filter
• Checked Differential Oils - changed oils after repairs completed
• Checked 4 wheel planetary oils - changed oils after repairs completed
• Checked rear axle oscillation - good
• Checked center articulation - good
• Checked engine high & low idle
• Checked torque converter stall speed
• Checked all transmission pressures
• Checked all hydraulic pressures

Completed all Needed mechanical repairs as follows:
• Disassembled machine to complete all Needed repairs
• Rebuilt Transmission
• Replaced Transmission mounts
• Rebuilt Turbo, installed with new seals, studs and gaskets
• Replaced injectors with CAT Reman
• Removed Radiator cores and sent out for cleaning, testing and re-installed with New seals
• Completed Valve set and replaced Valve cover gaskets
• Replaced rear main crank seal
• Replaced front crank seal
• Rebuild fan pump
• Rebuild implement pump
• Rebuild transmission pump
• Rebuild steering pump
• Rebuild fan motor
• Installed rebuilt starter with gaskets and seals
• Resealed steering cylinders
• Replaced steering bushings, pins and grease seals
• Cleaned and resealed lower radiator tank
• Resealed brake accumulator
• Removed water to water coolers from engine, sent for testing and installed with new gaskets and seals
• Resealed hydraulic tank
• Replaced front axle pinion seals
• Replaced rear axle trunnion bushings
• Replaced front trunnion, carrier and pinion bearings
• Rebuilt STIC steering
• Installed new seat
• Replaced AC lines to top of cab
• Removed heater core and evaporator and sent for testing
• Installed NEW engine belts
• Blade pin bores align bored , new pins and bushings installed
• Completed all sheet metal and cosmetic repairs.
• Complete machine has been sandblasted, primed, painted and New decals applied.
• Completed Work Ready Machine.... See More