2017 Caterpillar 772G For Sale

CAT 772G (2017) UNIT# T2873
MACHINE HOURS: 9,930
LOAD FACTOR: 22%
NEUTRAL HOURS: 2,694
A CAT 772 with a Flat Floor Steel Lined Bed, Body Side Boards, Heated Body, 21.00R33 Tires, Espar Heater, CAT Auto Greaser, Rear Camera, Truck Payload Management System, CAT Dealer Inspected, All Needed Repairs & Servicing Completed.

Caterpillar 772 Rock Truck
• CAT C18 ACERT Engine
• Automatic 7 Speed Transmission
• Cab (ROPS) w/ A/C
• Supplemental Steering
• Cold Weather Arrangement
• Oil Immersed Disc Brakes
• Extended Life Brakes
• 51 Ton/41 CYD Capacity
• Truck Payload Management System
• Flat Floor Body
• 21.00R33 Tires
• Rear Michelin X-Tra Load Grip L4 Tires
• Automatic Retarding Control
• Cab Air Pre-Cleaner
• Heated Side Mirrors
• Rear View Camera
• Fuel Heater
• Wheel Chocks
• Central Lubrication
• Rated at 598 HP
• Weight 80,000 LBS

When unit arrived in yard, MEL had local CAT dealer complete the following:
• Strip machine for power washing
• CAT TA inspection
• Update ECM flash files
• Cut open all filters & inspect for contaminates - all clean
• Service engine
• Inspect magnetic plugs/screens & suction screens- all clean
• Check oil levels
• Inspect oils for discolouration
• Check for logged & active codes & repair

Completed the following pressure checks to ensure within OEM spec:
• Engine rpm high & low idle
• Engine oil high & low idle pressures
• Fuel pressure
• Full stall boost
• Full stall speed
• Transmission pump pressure
• Transmission lube pressure
• Steering pressure check
• Steering high pressure cut-off
• Hoist relief pressure
• Brake cut-in/cut-out pressure

Based on inspection, MEL completed the following repairs:
• Installed NEW front brake pads & rotors
• Installed NEW duo cone seal on front left wheel hub
• REBUILT right rear brakes w/ all NEW plates & friction discs
• Left rear brakes removed, cleaned, inspected & resealed
• Installed NEW duo cone seal on rear wheel ends
• Replaced all required brake hoses/lines
• Installed NEW pins & bearings on rear suspension cylinders
• Right rear suspension sensor broken – replaced sensor
• Installed NEW transmission output shaft seal
• Transmission filler joint coupler leaking – replaced coupling
• Installed NEW oil drain line on turbo
• Serviced DPF- field cleaned
• Serviced emission system w/ NEW filter, DEF injector & spark plug
• Replaced all required w/ NEW coolant lines
• Installed NEW a/c compressor, accumulator & dryer
• Replaced required hydraulic lines
• Replaced required powertrain lines
• Line bored rear box mount bores
• Installed NEW box mount pins & bearings
• Steering cylinders have play at barrel end - installed NEW tie rods
• Line bored rear axle A-frame bore
• Installed NEW pin & bearing in A-frame
• Installed NEW pins & bearings in rear axle stay arm
• Completed required cosmetic & welding repairs
• Box bed was inspected & repaired as needed
• Machine is ready to go to work.... See More