Construction Integrated Tool Carriers for Sale (1 listing)

TWO SUPER LOW HOUR UNITS AVAILABLE

EPA PRESENT



PARALLEL LIFT TOOL CARRIER!
3.5 YARD BUCKET
AUX HYDRAULICS
HYDRAULIC COUPLER
RIDE CONTROL



Axles and Final Drives

Drive system    Four-wheel drive
Front    Fixed, semi-floating
Rear    Center-pin support, semi-floating, 24° total oscillation
Reduction gear    Spiral bevel gear
Differential gear    Torque proportioning
Final reduction gear    Planetary gear, single reduction



Brakes

Service brakes    Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake    Wet, multi-disc brake on transfer output shaft
Secondary brake    Parking brake is commonly used



Engine

Model    Komatsu SAA6D107E-3*
Type    Water-cooled, 4-cycle
Aspiration    Variable geometry turbo-charged, after-cooled, cooled EGR
Number of cylinders    6
Bore x stroke    4.21 x 4.88 in
Piston displacement    408 in³
Governor    All-speed, electronic
Horsepower:
Gross - SAE J1995    153 HP
Net - ISO 9249/SAE J1349    149 HP
Rated rpm    2,000 rpm
Max power - ISO 14396 @ 1,650 rpm    149 HP
Fan drive method for radiator cooling    Hydraulic
Fuel system    Direct injection
Lubrication system:
Method    Gear pump, force-lubrication
Filter    Full-flow type
Air cleaner    Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Final emissions certified



Hydraulic System

Steering system:
Hydraulic pump    Piston pump, in common with loader control
Capacity (at rated rpm)    39.6 US gpm
Relief valve setting    3,000 psi
Hydraulic cylinders:
Type    Double-acting, piston type
Number of cylinders    2
Bore x stroke    2.76 x 17.8 in
Loader control:
Hydraulic pump    Piston pump, in common with steering system
Capacity (at rated rpm)    39.6 US gpm
Relief valve setting    4,554 psi
Hydraulic cylinders:
Type    Double-acting, piston type
Number of cylinders:    bore x stroke:
Lift cylinder / 2    4.3 x 28.2 in
Bucket cylinder / 1    5.5 x 18.9 in
Control valve    2-spool type
Control positions:
Boom    Raise, hold, lower, and float
Bucket    Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise    6.0 s
Dump    2.0 s
Lower (empty)    3.2 s
Service Refill Capacities
Cooling system    8.8 US gal
Fuel tank    49.1 US gal
Engine    6.1 US gal
Hydraulic system    21.1 US gal
Axle front    4.9 US gal
Axle rear    4.8 US gal
Transfer case    1.8 US gal
DEF tank    3.7 US gal



Steering System

Type    Articulated type, fully-hydraulic power steering
Steering angle    38° each direction (40° to max end stop)
Minimum turning radius at 
the center of outside tire    17 ft. 0 in
Transmission
Transmission: Hydrostatic, 1 pump, 2 motors with speed range select

Travel Speed:    Forward    Reverse
1st    0.6 - 8.1 mph    0.6 - 8.1 mph
2nd    
8.1 mph
8.1 mph
3rd    11.8 mph    11.8 mph
4th    23.6 mph    23.6 mph
Measured with 20.5-R25 tires

We have been selling equipment across Canada for 12+ years and offer competitive shipping rates nation wide.... See More