Caterpillar for Sale in Ontario (3 listings)

CAT 988K (2015) UNIT# L7252A
MACHINE HOURS: 6,535
LOAD FACTOR: 33%
High Lift or Standard Boom Options, Choice of New CAT Spade Rock Bucket or New Straight Edge Rock Bucket with Teeth, Michelin XTXL L4 Tires (not as shown) Other Tire Options are available, Additional Factory Counterweight, 3rd Valve & Lines Group, CAT Automatic Greaser, Rear View Camera, Heavy Duty Crankcase & Powertrain Guards. This Loader had been equipped since New with a Side Dump Bucket and used to carry aggregate materials in the construction of tunnels through mountains. As such, this machine has lived a very easy life and is in Very good condition.
It has been thoroughly inspected by Toromont CAT, our servicing CAT Dealer and all servicing and Needed Repairs have been completed by Toromont CAT and Marcel Equipment.
Please contact Mark or John for all the details of this Loader.

Caterpillar 988K Wheel Loader:
• CAT C18 ACERT Engine
• Michelin XTXL L4 Tires (not as shown)
• Other Tire Options Available
• Choice of High Lift or Standard Boom Options
• Choice of Buckets
• NEW CAT Spade Rock Bkt w/ Teeth
• OR
• NEW Straight Edge Rock Bkt w/ Teeth
• Additional Counterweight
• 3rd Valve & Lines Group
• CAT Automatic Greaser
• High Speed Oil Change
• Heavy Duty Crankcase
• Heavy Duty Powertrain Guards
• Hydraulic Tank Guard
• Axle Oil Coolers
• Engine Air Turbine Pre-Cleaner
• Flood & Signal Light Arrangement
• Additional LED Flood Lights
• Rear View Camera
• Ride Control
• STIC Steering
• Cab Air Pre-Cleaner
• Secondary Steering
• Steering Cylinder Guards
• Rated at 580 HP
• Weight 125,000 LBS

At 4,995 hours, completed 5,000 hour emission service
When this used caterpillar wheel loader arrived in yard, MEL had local CAT dealer complete the following:
Strip machine for power washing
CAT TA inspection
Cut open all filters & inspect for contaminates - all clean
Service engine
Inspect magnetic plugs/screens & suction screens
Check oil levels
Inspect oils for discolouration
Check for logged & active codes & repair
Update ECM flash files

Completed the following pressure checks to ensure within OEM spec:
• Engine high & low idle
• Engine high & low oil
• Fuel high & low idle
• Boost
• DPF differential
• Pilot
• Main relief
• Implement standby
• Steering pump standby
• Brake charge
• Service & park brake tests
• Pilot accumulator test

Based on inspection, CAT mechanic completed the following repairs on this CAT 988K wheel loader:
• Resealed engine oil pan
• Resealed right hand starter
• Serviced the emission system as needed
• Repaired leaking transmission relief valve
• Repaired leak from thermostat elbow
• Replaced ECM coolant lines
• Serviced battery connections

The following repairs were completed by Marcel Equipment on this 988K CAT:
Completed our own visual & operational inspections
Replaced wiper knobs
Replace 2 plastic console pieces in cab
Repaired steering control
Replaced plastic pieces around steering control
Replaced EGR water line clamp that was missing
Replaced 2 clamps on overflow tank line that were missing
Replaced 2 rear HID lights
Replaced 2 rear cab work lights
Installed 3rd function lockout switch
Cleaned heater box & pre-cleaner
Replaced washer pumps
Resealed both steering cylinders
Resealed right side lift cylinder
Replaced top rad hoses
Replaced 2 heater taps
Replaced block heater
Completed required cab repairs
Completed misc repairs on machine
Greased machine
Machine is ready to go to work.... See More