Skip to main navigationSkip to main content

Attachments Equipment for Sale (70 listings)

Find new and used attachments across Canada for construction, forestry, material handling, and general earthmoving work. Browse core attachment types including Blades, Buckets, Couplers, Grapples, and Hammers, so you can compare fitment, hydraulic requirements, jobsite application, and machine compatibility before shortlisting units. Whether you are adding versatility to an excavator fleet, replacing worn bucket inventory, or sourcing specialized tools for demolition, land clearing, or material handling, listings cover a wide range of attachment categories for different machine classes and operating conditions. Leading brands in this category include Caterpillar (CAT), FMS, Weldco Beales, IMAC, and CWS. Browse thousands of listings from dealers and private sellers across Canada.


  • 2006 WBM PG26

    2006 WBM PG26

    $8,000 CAD

    WBM 96" Pipe and Pole Grapple to Fit Volvo L150 

  • WBM 36"

    WBM 36"

    $16,500 CAD

    WBM 36" [Used] - Construction Attachments - Buckets - Frost 

  • WBM 800 SERIES

    WBM 800 SERIES

    $27,500 CAD

    WBM 800 SERIES WBM 800 Series Excavator Twist Bucket *96 inch *5 cu... 

  • WBM 330D

    WBM 330D

    $17,500 CAD

    84'' WBM Cat 330D Tilt Clean Up Bucket Finning Lugging, 21 1/4 Inside... 

  • WBM 325CL

    WBM 325CL

    $10,500 CAD

    66'' WBM Cat 325CL Tilt Clean Up Bucket Finning Lugging 19 1/2 Inside... 

  • WBM

    WBM

    $8,800 CAD

    WBM 63" Q/C CLEANUP BUCKET FITS EX230 OR SIMILAR MACHINES FITS 250 TO... 

  • WBM WBM KAT STYLE LUGS

    USED WBM COUPLER WITH WBM KAT MASTER HITCH [Used] - Construction... 

  • WBM 300 SERIES WITH WBM STYLE LUGGING

    USED WBM 36" EXCAVATOR FROST BUCKET WITH WBM QA [Used] - Construction... 

  • WBM WBM KAT STYLE LUGS

    USED WBM PG150DRS HYDRAULIC PIPE GRAPPLE WITH WBM KAT LUGS TO FIT SERIES... 

  • WBM 850 Series

    USED WBM 96" CLEANOUT BUCKET WITH IMAC QA [Used] - Construction... 

  • WBM 600 Series

    UNUSED WBM EXCAVATOR QUICK ATTACH [Used] - Construction Attachments -... 

  • WBM 600 Series

    USED SET OF TWO LUGS - WBM [Used] - Construction Attachments - Coupler /... 

  • WBM 800 SERIES

    USED 181" HYDRAULIC CHUCK BLADE WITH WBM QA [Used] - Construction... 

  • WBM WBM KAT STYLE LUGS

    USED WBM PG20 PIPE GRAPPLE WITH WBM KAT LUGS [Used] - Construction... 

  • WBM 800 SERIES

    GOOD USED WBM EXCAVATOR HYDRAULIC QUICK ATTACH [Used] - Construction... 

Buying Considerations

Start with carrier compatibility, not just attachment type. Confirm pin size, coupler setup, machine weight class, hydraulic flow requirements, and any control or plumbing needs before comparing listings. For used attachments, review wear on cutting edges, teeth, bushings, side plates, weld seams, and mounting points, along with any signs of distortion or cracking from prior heavy use. Also factor in rebuild costs, local parts support, and whether the attachment is already configured for the machine class you plan to run.

Dealer Network

Buyers can source equipment from established attachment dealers including Arrow-West Equipment, Edge Equipment, Korpan Tractor & Parts Ltd., and Optimum Equipment Solutions.

Find Attachments by Province

Browse attachments in Alberta, British Columbia, and Saskatchewan.

FAQ

What matters most when comparing used attachments that look similar on paper?

Fitment and wear condition matter more than generic category labels. Compare mounting setup, hydraulic configuration, structural wear, and whether the attachment has already been used on a machine similar to yours. A lower-priced unit can become more expensive if it needs adaptation or rebuild work before it is usable.

How should I evaluate attachment compatibility before I buy?

Start with machine weight class, pin dimensions, coupler type, and hydraulic flow. Then confirm control requirements, hose routing, and whether the attachment's intended duty matches your application. Small mismatches in geometry or flow can create poor performance or premature wear.

What documents or details should I ask for before I commit to a used attachment?

Request detailed photos of mounting points, cutting surfaces, wear components, welds, and any hydraulic connections, along with service or rebuild history if available. For higher-value units, ask whether any structural repairs were done and whether the attachment came off a known machine model or fleet.

Subscribe to the Supply Post Print Edition

Supply Post Cover - The Aggregate & Mining Equipment Issue - June 2026

Receive 12 issues per year delivered right to your door. Anywhere in Canada or USA.

Subscribe

Read

Free

the Digital Edition

Supply Post Cover - The Aggregate & Mining Equipment Issue - June 2026
Supply Post Cover - The Aggregate & Mining Equipment Issue - June 2026

Free

Read the Digital Edition

Please wait...