Attachments Equipment for Sale in Alberta (90 listings)
Find new and used attachments across Canada for construction, forestry, material handling, and general earthmoving work. Browse core attachment types including Blades, Buckets, Couplers, Grapples, and Hammers, so you can compare fitment, hydraulic requirements, jobsite application, and machine compatibility before shortlisting units. Whether you are adding versatility to an excavator fleet, replacing worn bucket inventory, or sourcing specialized tools for demolition, land clearing, or material handling, listings cover a wide range of attachment categories for different machine classes and operating conditions. Leading brands in this category include Caterpillar (CAT), FMS, Weldco Beales, IMAC, and CWS. Browse thousands of listings from dealers and private sellers across Canada.
-
Lowe 12" Stump Planer
$1,499
12" LOWE STUMP PLANER - BIT - 2" HEX, 3 REPLACABLE HARDED STEEL BLADES!...
-
-
-
-
-
-
MK Martin 72" LP678
$4,900
MK MARTIN LAND PLANE - SKID STEER OR/AND 3-POINT MOUNT!! ADD: SKID STEER...
-
-
-
-
-
-
MK Martin 84" LP778
$5,200
MK MARTIN 84" LP778 LAND PLANE - SKID STEER OR/AND 3-POINT MOUNT!! ADD:...
-
-
-
-
-
Buying Considerations
Start with carrier compatibility, not just attachment type. Confirm pin size, coupler setup, machine weight class, hydraulic flow requirements, and any control or plumbing needs before comparing listings. For used attachments, review wear on cutting edges, teeth, bushings, side plates, weld seams, and mounting points, along with any signs of distortion or cracking from prior heavy use. Also factor in rebuild costs, local parts support, and whether the attachment is already configured for the machine class you plan to run.
Dealer Network
Buyers can source equipment from established attachment dealers including Arrow-West Equipment, Edge Equipment, Korpan Tractor & Parts Ltd., and Optimum Equipment Solutions.
Find Attachments by Province
Browse attachments in Alberta, British Columbia, and Saskatchewan.
FAQ
What matters most when comparing used attachments that look similar on paper?
Fitment and wear condition matter more than generic category labels. Compare mounting setup, hydraulic configuration, structural wear, and whether the attachment has already been used on a machine similar to yours. A lower-priced unit can become more expensive if it needs adaptation or rebuild work before it is usable.
How should I evaluate attachment compatibility before I buy?
Start with machine weight class, pin dimensions, coupler type, and hydraulic flow. Then confirm control requirements, hose routing, and whether the attachment's intended duty matches your application. Small mismatches in geometry or flow can create poor performance or premature wear.
What documents or details should I ask for before I commit to a used attachment?
Request detailed photos of mounting points, cutting surfaces, wear components, welds, and any hydraulic connections, along with service or rebuild history if available. For higher-value units, ask whether any structural repairs were done and whether the attachment came off a known machine model or fleet.
Filtered on:
By Category
By Equipment Type
- Auger Drives (2)
- Augers (4)
- Bale Spear (2)
- Blades (3)
- Booms (6)
- Brooms (4)
- Brush Cutter (7)
- Compactors (2)
- Grapples (1)
- Hammers & Breakers (1)
- Levelers (3)
- Loaders (1)
- Mixer Bowl (1)
- Mowers (8)
- Planers (3)
- Pole Setters (2)
- Post Drivers (6)
- Push Block (1)
- Racks (3)
- Rakes (3)
- Saws (2)
- Skid Steer (19)
- Spoon (1)
- Spreaders (1)
- Sweepers (1)
- Tillers (2)
- Tree Spades (1)
By Make
- Berlon (5)
- Bradco (6)
- Bucket Bunker (3)
- CID (1)
- Conterra (1)
- Digga (5)
- EZ SPOT UR (2)
- Erskine (3)
- Eterra (8)
- FFC (2)
- HLA (17)
- Jeffrey (2)
- Langner (7)
- Lowe (1)
- MK Martin (7)
- Metal Pless (2)
- No Make (3)
- Paladin (12)
- Sweepster (3)
By Model
- 1000LE (1)
- 12" Stump Planer (1)
- 13.5' - 20' (1)
- 215 (1)
- 24" Rock (1)
- 2DSS (1)
- 3000 LB Capacity (1)
- 33"x48" (1)
- 4'-8' Extendable (1)
- 400LE (2)
- 42" Max Cut Econo (1)
- 48" Mini Angle (1)
- 50" (1)
- 6' - 10' (1)
- 6-11 LE (1)
- 60" (1)
- 6500 LB Capacity (1)
- 66" 16-28 GPM (1)
- 70" Rock (1)
- 72" (3)
- 72" Box Grader (1)
- 72" LP678 (1)
- 72" MK678 (1)
- 75" Rock (1)
- 750LE (2)
- 78" 22-41 GPM (1)
- 8-13 (1)
- 84" (6)
- 84" LP778 (1)
- 84" MK778 (1)
- 84" Rock (1)
- 90" (1)
- 96" (1)
- 96" Low Pro XD (1)
- Angle (1)
- Auger Lite-Mini (1)
- Bale/Hay (1)
- Dual Spear (1)
- Flail Mower (2)
- Full Size (1)
- Funnel Bucket (1)
- Grapple Pro (1)
- Ground Shark HD (1)
- Ground Shark SD (1)
- Ground Shark XD (1)
- Heavy Duty (1)
- High Dump (2)
- Hopper (1)
- Limb Saw (1)
- MM10K (1)
- Micro Flail (1)
- Mini Angle (1)
- Mini-EX2T (1)
- No Model (6)
- PDX-1000 (1)
- Pulsar UTV Moer (1)
- Raptor (1)
- Rock Saw (1)
- SSB750 (1)
- Sickle Bar (1)
- Sickle Mower (1)
- Side Discharge (4)
- Sidewinder Mini Flail (1)
- Slab Lifter (1)
- Standard Duty (1)
- Stone Picker (1)
- Swale (1)
- TPE (2)
- Tree Spade (1)
- VRS (1)
By Year
By Branch
By Status
Subscribe to the Supply Post Print Edition
Receive 12 issues per year delivered right to your door. Anywhere in Canada or USA.
SubscribeRead Free
the Digital Edition
Free