Attachments Equipment for Sale in Alberta (337 listings)
Find new and used attachments across Canada for construction, forestry, material handling, and general earthmoving work. Browse core attachment types including Blades, Buckets, Couplers, Grapples, and Hammers, so you can compare fitment, hydraulic requirements, jobsite application, and machine compatibility before shortlisting units. Whether you are adding versatility to an excavator fleet, replacing worn bucket inventory, or sourcing specialized tools for demolition, land clearing, or material handling, listings cover a wide range of attachment categories for different machine classes and operating conditions. Leading brands in this category include Caterpillar (CAT), FMS, Weldco Beales, IMAC, and CWS. Browse thousands of listings from dealers and private sellers across Canada.
Buying Considerations
Start with carrier compatibility, not just attachment type. Confirm pin size, coupler setup, machine weight class, hydraulic flow requirements, and any control or plumbing needs before comparing listings. For used attachments, review wear on cutting edges, teeth, bushings, side plates, weld seams, and mounting points, along with any signs of distortion or cracking from prior heavy use. Also factor in rebuild costs, local parts support, and whether the attachment is already configured for the machine class you plan to run.
Dealer Network
Buyers can source equipment from established attachment dealers including Arrow-West Equipment, Edge Equipment, Korpan Tractor & Parts Ltd., and Optimum Equipment Solutions.
Find Attachments by Province
Browse attachments in Alberta, British Columbia, and Saskatchewan.
-
2023 Topcat SSSG72
P.O.R.2023 TOPCAT SSSG72 72'' Skid Steer Dozer Grader Blade S/N -...
For Sale or Rent
-
2023 Horst Welding HLA 4500
P.O.R.2023 HORST WELDING SP450012 Horst Welding Snow Pusher Model: HLA 4500...
For Sale or Rent
-
2017 Caterpillar CVP40
P.O.R.2017 CATERPILLAR CVP40 CAT / EFI CVP40 Ho Pac EARS ID - 30cm OD -...
For Sale or Rent
-
2012 NPK C8C C8100
P.O.R.2012 NPK C8C C8100 2012 NPK C8 C Compactor S/N - 1N8758 Fits - Cat...
For Sale or Rent
-
-
-
-
Unknown V Bucket
P.O.R.N/A V-BUCKET Pin on Bucket for Cat 320-07 [Used] - Construction...
For Sale or Rent
-
IMAC WL040-FPP48
P.O.R.IMAC WL040-FPP48 IMAC Pipe Grapples Fit Cat IT28F 8 Ft wide / 4 ft...
For Sale or Rent
-
Weldco Beales 66"
P.O.R.WELDCO BEALES MFG BCKT:TCB,66IN.1.25YD WBM Wrist Bucket Fits CAT 320E...
For Sale or Rent
-
Allied 1600
P.O.R.ALLIED HOPAC 1600 Allied Hopac 1600 Fits - JD 210 / Cat 320 Ears ID...
For Sale or Rent
-
-
-
NPK C8C C8100
P.O.R.NPK C8C C8100 NPK C-8C Fits - Cat 340 with Current Ears S/ N -...
For Sale or Rent
-
CWS HX40
P.O.R.CWS HX40 CWS V Bucket Fits - Komatsu PC220-8 S/N - 164318 Ears ID...
For Sale or Rent
-
Lift Master JD 544K
P.O.R.INDUSTRIAL AMERICAN JD 544K Industrias America Jib Fits - JD 444 - 724...
For Sale or Rent
-
KENCEL ENTERPRISES WINDER II Kencel Enterprises Level - Winder II...
For Sale or Rent
-
FAQ
What matters most when comparing used attachments that look similar on paper?
Fitment and wear condition matter more than generic category labels. Compare mounting setup, hydraulic configuration, structural wear, and whether the attachment has already been used on a machine similar to yours. A lower-priced unit can become more expensive if it needs adaptation or rebuild work before it is usable.
How should I evaluate attachment compatibility before I buy?
Start with machine weight class, pin dimensions, coupler type, and hydraulic flow. Then confirm control requirements, hose routing, and whether the attachment's intended duty matches your application. Small mismatches in geometry or flow can create poor performance or premature wear.
What documents or details should I ask for before I commit to a used attachment?
Request detailed photos of mounting points, cutting surfaces, wear components, welds, and any hydraulic connections, along with service or rebuild history if available. For higher-value units, ask whether any structural repairs were done and whether the attachment came off a known machine model or fleet.
Filtered on:
By Category
By Equipment Type
- Augers (1)
- Blades (5)
- Buckets (1)
- Buckets - Ditching (57)
- Buckets - Frost (5)
- Buckets - GP (12)
- Buckets - Other (43)
- Buckets - Rock (27)
- Buckets - Screening (1)
- Buckets - Skeleton (6)
- Buckets - Trenching (25)
- Compactors (31)
- Forks (53)
- Grapples (3)
- Hammers & Breakers (4)
- Jibs (12)
- Mulchers (1)
- Rakes (4)
- Rippers (38)
- Shears (1)
- Snow Plow (4)
- Trenchers (1)
- Winches (2)
By Make
- ALLU (1)
- AMI (1)
- Accurate (4)
- Allied (2)
- Balderson (1)
- Brandt (63)
- CF (1)
- CWS (27)
- Caterpillar (28)
- Craig (1)
- Custom (16)
- Daequip (2)
- Destec (1)
- EDF (1)
- EFI (11)
- EMC (3)
- EV (1)
- Ellis Fabrication (3)
- FMS (3)
- Felco (1)
- Finning (6)
- Genesis (1)
- HLA (1)
- Horst Welding (1)
- IMAC (17)
- JPH (2)
- JRB (1)
- John Deere (2)
- Kencel Enterprises (1)
- Komatsu (1)
- Lift Master (1)
- Mower King (1)
- NPK (19)
- No Make (21)
- R-KKAN (1)
- SEC (1)
- SMS (6)
- Tag (1)
- Takeuchi (2)
- Talet (2)
- Topcat (1)
- Tysea (1)
- Unknown (13)
- Viking West (1)
- Virnig (1)
- WBM (27)
- WRT (3)
- Wajax (2)
- Weldco Beales (28)
- Xhand (1)
By Model
- 12' (1)
- 1600 (2)
- 2' (4)
- 200 (2)
- 250 SERIES CLEAN UP BUCKET FOR EXCAVATOR (2)
- 250 Series (1)
- 300 Series (4)
- 326 (10)
- 349 (2)
- 4' (4)
- 42" (2)
- 470 (1)
- 471-1731 (2)
- 5 In 1 (1)
- 5' (1)
- 50 (1)
- 6' (1)
- 60G (1)
- 62" (1)
- 6241 K-6 (1)
- 64" (1)
- 66" (2)
- 699-6 (1)
- 72" (8)
- 78" (2)
- 8' (1)
- 80" (1)
- 82" (2)
- 84" (2)
- 96" (1)
- Adjustable (6)
- Auger (1)
- B6 (1)
- Back Blade (2)
- Brush Rake (1)
- Buster 36-103-10 (1)
- C3D (2)
- C4C (4)
- C6C (2)
- C8C (3)
- C8C C8100 (7)
- CLEAN UP (5)
- CVP40 (1)
- Chuck Blade (2)
- EX120R (1)
- EXO0400-BCUS84 (1)
- EXO300-BCUS72 (1)
- EXO400-BDHD54 (1)
- Forks (2)
- GDP650 (1)
- GH6 (1)
- HDD (1)
- HE300 (1)
- HLA 2500 (1)
- HLA 4500 (1)
- HOE PAC (3)
- HX40 (1)
- Hose Reel (1)
- IT28 (1)
- JD 250 (1)
- JD 544K (1)
- No Model (190)
- PF20 (1)
- PT13 (1)
- PT15 (1)
- Pipe Grapple (2)
- SDB 201 (1)
- SMH 3-17 (1)
- SSSG72 (1)
- Spoon (1)
- TG16 (1)
- Trencher (1)
- Trommel (1)
- V Bucket (1)
- WL 150-MG-15 (1)
- WL040-FPP48 (5)
- WL040-PPG48 (2)
- WL040/060-PPG48 (1)
- WL080-FPP72 (1)
- Winder II (1)
By Year
By Dealer
By Status
By Class
Subscribe to the Supply Post Print Edition
Receive 12 issues per year delivered right to your door. Anywhere in Canada or USA.
SubscribeRead Free
the Digital Edition
Free