New and Used Equipment in Alberta (9 listings)

The iMast is a self-sustaining telescoping mast unit, capable of deploying the injector to multiple well heads within its load radius. The iMasts consists of a Wetkit, Trailer, Boom & Crown.The Crown assembly allows the mast to mechanically latch to an injector, allowing the mast to safely control & articulate the injector around the wellsite. The booms telescope from a retracted length of approx. 36ft (11m) and can telescope to approx. 90ft (27.5m) – giving a maximum of 100’ (30m) clear underneath the injector.

The mast has been designed in accordance to API 4F & is able to service 3 wells @ 5m spacing without having to relocate the equipment. Above all, this unit will be able to safely move the injector, tubing, hoses & lubricators from well to well. The iMast provides the flexibility of a crane, with the structure & safety of a masted coil unit.

The Tractor wet kit will supply all the hydraulic power for the mast functions as well as the hydraulically powered 15kW genset. All mast functions will be controlled from the remote control box, which can be used from either the storage/operation cabinet on the driver’s side or a remote stand. The unit will be designed for ambient temperature range of -40oC to +40oC.


Trailer
The mast trailer will be a Tridem axle, single drop trailer which is 10’6” (3.2M) wide with an approximate wheelbase of 438”. The deck of the Mast trailer will have side access ladders.. The trailer will have the following features:

CHASSIS
· Center rail, Skeletal frame fabricated with pin on 3 ft, 5th wheel extension
CAPACITY
· 110,000 lbs (49,895kg) AREA OF OPERATION
· Canada/USA DIMENSIONS
· 51 ft 4 in (15.7m) overall length
· 126 in (3.2m) overall width, during operation of the unit will exceed 126 in (3.2M) with the ladders and outriggers deployed
· 162 (4.11m) overall height
· All dimensions are approximate and are subject to change depending upon the final configuration of the unit

CROSSMEMBERS
· Formed and fabricated crossmembers located where required
GOOSENECK
· Gooseneck length 182 in (4.62 m), square gooseneck
JEEP AND BOOSTER
· Provisions for single axle booster only (Not supplied) SUSPENSION
· Ingersoll 30,000 lb (13607 kg) ISS air ride suspension with 60 in. axle spacing

AXLES (3)
· Three (3) Ingersoll ISS 25,000 lb (11,340 kg) each, 99 in. (2.5m) track, STEMCO oil seals, open brake cams, dust shields and Haldex automatic slack adjusters

ABS BRAKES
· Meritor 2S/1M ABS systems consisting of (2 sensors and 1 module)
BRAKES
· Brakes are 16 ½ in. x 7 in. Q type brakes with 30/30 spring brakes and Haldex automatic slack adjusters. Brakes rated for 22,500 lbs per axle

HUBS AND DRUMS
· 1 MT F24 16 ½ in. x 7 in. 10 stud unimount piloted hubs with cast drums HUB LUBRICANT
· Non-synthetic oil TIRES
· 275/70R 22.5 Michelin XTY2 Tires on 8.25 in. x 22.5 in. polished ALCOA wheels BUMPER
· Heavy Duty oil field with rear tow lugs

FENDERS
· Front and rear fenders complete with mud flaps

LANDING GEAR
· Jost A440-T17 2-speed manual 62,500 lb (28,349kg) AIR SYSTEM
· CMVSS/FMVSS approved air system
· Wire braided air lines with crimped ends
· Dump valve and suspension pressure gauges mounted in sealed box with valving to maintain a minimum air pressure to prevent bag pinching
ELECTRICAL SYSTEM
· CMVSS/FMVSS modular 12 VDC electrical system using Trucklite LED lights and harness with three (3) lights per side... See More