2014 Caterpillar 972M Permanent URL
2014 Caterpillar 972M $295,000 CAD Video
WARRANTY INCLUDED - 8691 Hours - ECM Idle Hours: 2723 - Load Factor: 27% - Equipped with:For Sale
Caterpillar C9.3 ACERT Engine
Front Differential Lock
Cab (ROPS) with Air Conditioning
Ride Control System
6.25 Cubic Yard GP Bucket with BOE
26.5 x 25 Tires
Rear View Camera
Lights, Wipers, Heater
AM/FM Radio, Mirrors
Rated at 337 HP.
Approximately 54,875 LBS.
Repair / Condition Report
At 8691 hours, the local CAT dealer diagnosed a regen issue and completed the following:
- Updated software.
- Installed a NEW spark plug.
- Tested ARD head and it passed.
- Diagnosed to turbo oulet NOX sensor.
- Replaced sensor.
- Ran unit through tests and all passed.
Upon arrival, this unit was serviced and checked over.
We removed all covers from the machine and completely washed it.
Complete operational and visual inspection was completed.
Engine filter was cut open and checked for contaminates, it was clean.
Engine was then serviced.
Transmission oil filter was cut open and checked for contaminates and it was clean.
Transmission suction screen was checked and it was clean.
Transmission oil was changed.
Hydraulic filters were cut open as well and both were clean.
Front and rear differentials and all four wheel planetaries were checked, oil levels were good and oils were clean.
Differential oils were changed.
Inspected the articulation hitch for play and it was good.
Inspected the rear axle oscillation for play and it was good.
Inspected the loader control frame for play and it was good.
Upon purchase inspection, the following repairs were completed:
Repaired leak at fan pump and fuel charge pump.
Installed NEW bushings, pins and bearings on the rod end of the steering cylinders.
Installed a NEW cutting edge on the bucket.
REBUILT the parking brake with NEW shoes.
Checked the ride control operation.
Repaired a leak at the implement control valve.
Replaced the pilot accumulator with a NEW one.
Tested and serviced the batteries and connections.
Machine was fully greased.
The following pressure tests were performed by Marcel Equipment Limited to ensure they are within OEM specifications:
- Torque inlet and outlet pressure
- Transmission pump pressure
- Transmission lube pressure
- Front brake pressure
- Rear brake pressure
- Implement pressure
- Pilot pressure
- Steering pressure
- Brake cut-in and cut-out pressure
- Brake/Fan pump pressure
- Front differential lock pressure
- Engine boost pressure
- Engine oil pressure
- Brake accumulator pressures
- Ride control accumulator pressures
- Stall speed and Double stall speed
- Fan speed min and max
- All cycle times taken and within specifications.
At 8654 hours due to a valve lifter failure the CAT dealer completed the following:
Removed and disassembled the engine.
Repaired the engine with a NEW camshaft, rod/main/thrust bearings, piston rings, engine oil pump, fuel injection pump and cylinder head.
The engine was then reassembled with all NEW seals and gaskets.
At 7844 hours, the CAT dealer completed a rebearing/reseal of the rear axle oscillation assembly.
This unit is completed and is ready to go to work.
To view this unit on our website, please visit: http://www.marcelequipment.com/equipment/cat-972m-wheel-loader-l2641-2014.html Listing sourced from SupplyPost.com May 27, 2019 00:14
2014 Caterpillar 972M
- Make: Caterpillar
- Model: 972M
- Type: Loaders - Wheel
- Class: Used
- Status: For Sale
- Hours: 8691
- Stock #: L2641
Last Updated: May 22, 2019Supplypost.com Views: 184 | Dealer Website Views: 0
Looking for Equipment Financing? Browse our leading Equipment Finance Companies.