The Supply Post: Canada's #1 Heavy Construction Equipment & Commercial Truck Newspaper Since 1971

2014 John Deere 744K Permanent URL

  • 2014 John Deere 744K $225,000 CAD Video

    WARRANTY INCLUDED - 6878 Hours - This unit has only worked in a light application - Equipped with:
    John Deere Powertech 6090H Engine
    Powershift Transmission
    Reverse Fan Drive
    Locking Front Differential
    Cab (ROPS) with Air Conditioning
    Stick and Wheel Steering
    Axle Coolers
    Ride Control
    5.25 Cubic Yard Bucket with BOE
    NEW 26.5R25 Radial Tires
    Lights, Mirrors, Wipers, Radio
    Heater, Fenders, Inside Mirror
    Rated at 304 HP.
    Approximately 54,500 LBS.

    Repair / Condition Report
    Upon arrival to our yard, this unit was serviced and checked over.
    All covers were removed and unit was then powerwashed.
    Engine oil filter was removed and checked for contaminates. It was nice and clean.
    Transmission filter was cut open and checked and it was clean.
    Hydraulic filter was cut open and checked and it was also clean.
    Both differential oil levels were checked and they were good and clean.
    Replaced the pilot shut off valve.
    Engine and transmission heat up and cool down normally.
    Engine has no blowby.
    Oscillation and articulation joints are good.
    Front differential lock operates properly.
    Axle oil filter was checked and it was clean.
    Installed NEW steering cylinder pins.
    Checked the ride control as well as the brake and pilot accumulator pressures.
    Installed NEW cab filters.
    Checked the transmission suction strainer and it was nice and clean.
    Installed NEW wiper blades.
    Repaired the front windshield washer system.
    Checked the parking brake and it was good.
    Checked that all lights and switches were operational.
    Removed and resealed the implement and steering pumps.
    Checked the cooling fan speed.
    Checked the engine oil pressure - Low idle = 30 PSI - High idle = 48 PSI
    Transmission oil pressure - Low idle = 235 PSI - High idle = 265 PSI
    Torque converter inlet pressure - Low idle = 70 PSI - High idle = 190 PSI
    Hydraulic pressure = 3250 - 3300 PSI
    Cycle time is good. Boom up = 6 seconds (Specs: 6.4) - Boom down = 4 seconds (Specs: 3) - Dump = 2 seconds (Specs: 1.6)
    This unit has gone through our shops and has been checked over, serviced, greased and is ready to work.
    To view this unit on our website, please visit: http://www.marcelequipment.com/equipment/john-deere-744k-wheel-loader-l3348-2014.html Listing sourced from SupplyPost.com Nov 17, 2018 02:44

    Request More Info | 519-686-1123 |
    For Sale
    • Make: John Deere
    • Model: 744K
    • Type: Loaders - Wheel
    • Class: Used
    • Status: For Sale
    • Hours: 6878
    • Stock #: L3348
    Marcel Equipment Limited - London
    1000 Progress Drive
    London, ON  N6N 1B8 Canada
    Contact Name: Mark / John
    Phone: 519-686-1123
    Toll Free: 1-800-265-5747
    Fax: 519-686-9350
    Last Updated: November 05, 2018
    Supplypost.com Views: 253 | Dealer Website Views: 0

Looking for Equipment Financing? Browse our leading Equipment Finance Companies.

Permalink

This page's URL will never change unless this listing is deleted. Feel free to share it knowing https://www.supplypost.com/listings/862150/2014-john-deere-744k will always end up at the same listing!

More Listings

Looking for more listings like this? Loaders - Wheel » John Deere » 744K. Or see all listings for Marcel Equipment Limited.