The Supply Post: Canada's #1 Heavy Contruction Equipment & Commercial Truck Newspaper Since 1971

2014 Caterpillar D6N LGP Permanent URL

  • 2014 Caterpillar D6N LGP $255,000 CAD Video

    WARRANTY INCLUDED - 3267 Hours - ECM Idle Hours: 576 - Equipped with:
    Caterpillar C6.6 ACERT Engine
    Cold Weather Arrangement
    Powershift/Autoshift Transmission
    Cab (ROPS) with Air Conditioning
    6 Way PAT Blade
    Ripper and Accugrade Ready
    Differential Steer
    33" SBG Pads
    Full Bottom Roller Guards
    Powershift Winch with Cable and Hook is Available
    Drawbar
    Fire Extinguisher
    Lights, Heater, Wipers, Mirror, Radio
    Rated at 175 HP.
    Approximately 40,000 LBS.

    Repair / Condition Report
    Following are the service and repairs completed by Marcel Equipment Limited:
    Transmission pump pressure was checked and was within Caterpillar specifications.
    Main hydraulic pressure was checked and it was within Caterpillar specifications.
    Steering neutral pressure was checked and was within Caterpillar specifications.
    Checked the boost pressure.
    Left and right steering pressures were also checked and were within Caterpillar specifications.
    Checked the stall speed.
    Verified all switches are functional.
    Performed a full operational and visual inspection of unit.
    Engine oil filter was cut open and checked for contaminates and it was clean.
    Transmission filter was cut open and checked and it was clean.
    Hydraulic filter was also checked and it was clean.
    Inspected the final drives and they were clean.
    Changed the fuel filters.
    Changed the engine oil.
    Checked the air filters.
    Load tested the batteries and they were all good.
    Installed a NEW seal at the torque converter output shaft.
    Repaired the cab blower motor.
    Installed a NEW radio.
    Installed a NEW EGR valve.
    Installed a NEW fan belt.
    Installed a NEW engine thermostat.
    Installed a NEW coolant temperature sensor.
    Dissassembled the complete blade and C-frame assembly.
    Linebored the C-frame to tractor bores.
    Installed NEW pins and bearings where required.
    This is a very clean and low hour unit that is ready to go to work.
    To View this Unit on our Website, please visit: www.marcelequipment.com Listing sourced from SupplyPost.com Nov 14, 2018 11:36

    Request More Info | 519-686-1123 |
    For Sale
    • Make: Caterpillar
    • Model: D6N LGP
    • Type: Crawler Tractors / Dozers
    • Class: Used
    • Status: For Sale
    • Hours: 3267
    • Stock #: D2249
    Marcel Equipment Limited - London
    1000 Progress Drive
    London, ON  N6N 1B8 Canada
    Contact Name: Mark / John
    Phone: 519-686-1123
    Toll Free: 1-800-265-5747
    Fax: 519-686-9350
    Last Updated: November 06, 2018
    Supplypost.com Views: 320 | Dealer Website Views: 0

Looking for Equipment Financing? Browse our leading Equipment Finance Companies.

Permalink

This page's URL will never change unless this listing is deleted. Feel free to share it knowing https://www.supplypost.com/listings/862149/2014-caterpillar-d6n-lgp will always end up at the same listing!

More Listings

Looking for more listings like this? Crawler Tractors / Dozers » Caterpillar » D6N LGP. Or see all listings for Marcel Equipment Limited.