2014 Caterpillar 980M Permanent URL
2014 Caterpillar 980M $465,000.00 CAD Video
Unit Delivered New in March 2015 - CAT Dealer Maintained - WARRANTY INCLUDED - 3552 Hours - ECM Idle Hours: 1228For Sale
Worked in a Very Light Application - Equipped with:
Caterpillar C13 ACERT Engine
Cab (ROPS) with Air Conditioning
Joy Stick Steering
Cold Weather Arrangement
7.5 CY GP Bucket
Rear View Camera
Lights, Wipers, Heater
Mirrors, AM/FM Radio
CAT TA1 Complete Inspection is Available
Rated at 425 GHP.
Approximately 69,000 LBS.
Repair / Condition Report
Upon purchase inspection, the following was completed:
The local CAT dealer serviced this machine and completed a TA1 Plus Inspection.
During this inspection, they completed the following:
Removed the engine oil filter, cut it open and checked for contaminates, it was clean.
Removed the hydraulic oil filter, cut it open and checked for contaminates, it was clean.
Removed the transmission oil filter, cut it open and checked for contaminates, it was clean.
SOS samples were taken of all compartments.
They then serviced the engine.
Both final drive oil levels were good and oils were clean.
Both axle oil levels were good and oils were clean.
Updated the software in all of the electronic control modules.
Performed transmission and steering calibrations.
Verified that the following pressures were all within Caterpillar specifications:
- Boost pressure
- Fuel pressure
- Hydraulic pump pressure
- Transmission lube pressure
- Transmission pump pressure
- Torque outlet pressure
- Torque inlet pressure
- Clutch forward pressure
- Clutch reverse pressure
- Stall speed
After the local Caterpillar dealer completed their inspection, the following was completed by Marcel Equipment Limited:
A complete visual and operational inspection was completed.
All required action item repairs from the TA1 inspection were completed.
Replaced the cab air filters.
Transmission oil was changed.
Repaired all the lights.
Repaired the coolant leak at the heater core pipe.
Replaced any required hoses and lines.
Repaired the main engine wiring.
Resealed the left tilt cylinder.
Inspected the rear axle oscillation for play and it was good.
Inspected the center hitch for play and it was good.
Inspected the driveline, hanger bearings and u-joints.
Load tested the batteries.
Serviced the batteries and connections.
Verified all switches were operational in the cab.
Set the tire pressures.
Greased complete machine.
Completed required cosmetic repairs.
This unit is ready to go to work.
To view this unit on our website, please visit: http://www.marcelequipment.com/equipment/cat-980m-wheel-loader-l3643-2014.html Listing sourced from SupplyPost.com Jan 19, 2020 15:54
2014 Caterpillar 980M
- Make: Caterpillar
- Model: 980M
- Type: Loaders - Wheel
- Class: Used
- Status: For Sale
- Hours: 3552
- Stock #: L3643
Last Updated: May 21, 2019Supplypost.com Views: 982 | Dealer Website Views: 0
Looking for Equipment Financing? Browse our leading Equipment Finance Companies.