WARRANTY INCLUDED - 8203 Hours - ECM Idle Hours: 3059 - Load Factor: 19%
Forestry Package Includes Additional Counterweight, Bottom Guarding and Heavy Duty Tilt Cylinders
3rd Valve Auxiliary Hydraulics
Caterpillar C13 Tier 4 Interim Engine
Cold Weather Arrangement
Cab (ROPS) with Air Conditioning
Flood Light Arrangement
Front and Rear Axle Oil Coolers
Rear View Camera
29.5x25 Michelin XHA2 L3 Tires
CAT 7.5 CU YD GP Bucket with NEW CAT Base Edge and AR400 Liner
CAT 10.75 CU YD Light Material Bucket is Available
Lights, Wipers, Heater, Mirrors
Rated at 406 HP.
Approximately 69,000 LBS.
Repair / Condition Report
Upon purchase inspection, the following was completed:
All oils were checked and were good.
Checked the transmission strainer and it was clean.
Completed a full visual and operational inspection.
Checked all cab functions.
Removed all covers from the machine and completely washed it.
Verified that all pressures and stall speeds are within Caterpillar specifications.
Checked to ensure fan speed was also within Caterpillar specifications.
Articulation is good.
Rear axle oscillation is also good.
Tested and serviced batteries and connections.
Installed a NEW seal on the front differential input.
Rechromed the lift cylinders.
Repaired lights as required.
Installed NEW boots on the control levers.
Calibrated the hydraulic system.
The following tests were performed by Marcel Equipment Limited:
Fuel Pressure = 100 PSI (Spec 85)
Engine Oil Pressure = 77 PSI (Spec above 35)
Boost Pressure = 29 PSI
Steering Pressure = 3680 PSI (Spec: 3700 +-100)
Implement = 4560 PSI (Spec: 4500 +-100)
Pilot = 483 PSI (Spec: 500 +-50)
Stall = 2070 rpm (Spec: 2044 +70-40)
Pump = 370 PSI (Spec: 346 +-17)
Converter Outlet = 80 PSI (Spec: 65 +15-7)
Converter Inlet = 120 PSI (Spec: 96 +-25)
Lube = 65 PSI (Spec: 51 +11-7)
This unit has gone through our shop and is ready to go.
To view this unit on our website, please visit: www.marcelequipment.com
Looking for Equipment Financing? Browse our leading Equipment Finance Companies.