WARRANTY INCLUDED - 11454 Hours - Equipped with: Caterpillar 3176C Engine Powershift Transmission Differential Steer Cab (ROPS) with Air Conditioning Straight Blade with Tilt 36" SBG Pads Winch is Available Fire Suppression System Drawbar Wipers, Heater, Lights Radio, Mirror Rated at 258 HP. Approximately 60,000 LBS. Repair / Condition Report Upon purchase inspection, the following repairs and servicing was completed at 11104 hours: Engine oil and filter was changed, cut open and checked for contaminates and it was clean. Transmission filter was also changed, cut open and checked and it was clean. Hydraulic filter was changed, cut open and checked and it was also clean. NEW inner and outer air filters were installed. Installed a NEW fuel gauge sensor. Installed NEW fan belts and A/C belt. Checked the fan hub for proper operation. Resealed the starter mount. Removed, inspected and resealed the transmission pump. Replaced the transmission pressure hoses. Repaired the rear windshield washer pump. Checked all the lights for proper operation. Cleaned the heater core assembly. Rechromed and resealed both lift cylinders. Installed NEW standard main, rod and thrust bearings on the crankshaft as the oil pan gasket was seeping a bit of oil and this was a good opportunity to do this. Checked the engine oil pump at the same time. Blade assembly was dismantled and pins and bearings were replaced where needed. Following are pressure tests taken by Marcel Equipment Limited technicians: Engine oil pressure: 62 PSI Hydraulic oil pressure: 6050 PSI (over relief) Transmission pressure: 450 PSI at high idle Transmission pressure: 420 PSI at low idle Torque converter outlet pressure: 115 PSI Torque converter inlet pressure: 70 PSI All of the above pressures are within Caterpillar specifications. To view this unit on our website, please visit: www.marcelequipment.comFor Sale Or Rent
Looking for Equipment Financing? Browse our leading Equipment Finance Companies.