WARRANTY INCLUDED - 4901 Hours
John Deere 6068T Engine
Counter Rotation Steering
30" Single Bar Grouser Pads with NEW Chains, Idlers and Segments Installed
NEW Midwestern 540C Draw Works
24 Foot Boom
Draw Works and Boom Certified
40,000 LB. Lifting Capacity
John Deere Powershift Winch is Available
6 Way PAT Blade
Rated at 123 HP.
Approximately 28,300 LBS.
Repair / Condition Report
Upon purchase inspection, we completed the following:
Engine oil filter was cut open and checked for contaminates and it was clean.
We then serviced the engine.
Transmission and hydraulic filters were cut open and checked for contaminates and they were clean.
Changed the hydraulic oil.
Changed the transmission oil.
Checked the transmission, final drive and hydraulic oils and they were all clean.
Installed NEW sprocket segments.
Installed NEW track chains.
Installed NEW idlers.
Repaired any leaks on the machine.
Replaced any hoses as required.
Repaired the seat assembly.
Repaired the lights.
Calibrated the transmission.
Resealed the right side final drive.
Resealed the right side parking brake.
Repaired the track frame guards.
Repaired the radiator shroud and guards.
Installed a NEW bearing and pin on the angle cylinder.
Installed NEW pins and bearings on the tilt cylinder.
Installed a NEW Midwestern Model M540C Draw Works with a 24 foot boom.
This unit is now ready to work.
To view this unit on our website, please visit: www.marcelequipment.com
Looking for Equipment Financing? Browse our leading Equipment Finance Companies.