This month's issues

Western Canada
Supply Post Western Cover - October 2014
Central/Eastern Canada
Supply Post Eastern Cover - October 2014

Next Print Deadline

 Friday, November 14, 2014 »

Supply Post Archives »

 Subscribe to Supply Post

Published 12 times yearly, it is read by over 30,000 readers nationally each month!

Subscribe Now »

Model 2290 Brings Revenue To Pendley Farms

Jan 25, 2011

 Back to article listings for 2011

Having spent upwards of 30 years in the world of logging and sawmilling, Leonard Pendley of Pendley Farms LLC in Morgantown, Kentucky is well acquainted with the residual material left behind from logging and clearing operations. He left the logging realm in 2000 to focus more on real estate, but knowing the added value gained from clean, attractive property eventually led Pendley to consider purchasing a wood chipper for his waste wood, trees, and treetops. He spent upwards of six months researching various companies and different models, looking at everything from cost to capability and efficiency in processing small and large diameter material. His extensive research culminated with Bandit Industries and the Model 2290 whole tree chipper, and Pendley couldn't be happier with the 2290's performance. "My Bandit is wonderful; it's doing a great job" said Pendley. "I buy/sell real estate, and whenever I cut the timber off, it looks nasty. I decided to buy a chipper where I can go in and chip up the treetops, dress it up and make it look like a forest."

Pendley's Model 2290 uses a 350-horsepower CAT engine to process the material he clears from his properties. The 24.5 x 26-inch chipper opening and powerful infeed make short work of the limby material and ragged treetops he often encounters, and the chip quality is such that he doesn't have a problem finding customers for his end product. "The chip is really uniform," he said. "I've got 11 loads chipped on the current knives and I haven't set the anvil for the last 25-30 loads. I work with a couple paper companies that are awfully strong; I've got one that does a real good job buying all the products that I can put out, and I've got a mulching company that I sell to. I also sell mulch on the side, so I've got plenty of market for my material."

Prior to the 2290, he was using a competitor's horizontal grinder that was neither well-suited for his work nor very reliable. "It didn't load the trailer," explained Pendley. "It dropped it off on the ground, then you had to build a load ramp, and when you're in the woods you don't have as much room to do all that. It also had four bearings go out within 200 hours of use, costing me time and money. In this day and age, time and money are everything."

All in all, Pendley's Model 2290 is performing at or beyond his expectations. "I can load a 45-foot trailer and I've got a curtain on the front to keep from damaging the front wall of the trailer because it throws so hard," he said. "It's efficient; I get about 11 gallons an hour, or about 32 tons of material. The feed system is super, the wear and tear is real good, and the sales and service is fantastic."

Though he doesn't have any official plans to expand his current business, upgrading to a larger chipper isn't out the question. Should that time come, Pendley says he would stick with Bandit Industries. "I may go to a 3590," he says with a grin. "Overall, Bandit chippers are built heavy and good—I definitely recommend them to others."